Skip to main content

VIVAF4AIO

The VIVAF4AIO described here: https://team-blacksheep.com/products/prod:viva_f4_fc

  • STM32 F4 Processor
  • ICM20602 Gyro, BMP280 Baro
  • 5V 3A, 3.3V 0.5A BEC
  • 2-6S battery input
  • Betaflight OSD
  • 16MB BlackBox memory
  • Plug & Play connector for VivaFPV 4in1 ESC with telemetry & current sensor
  • Plug & Play connector for TBS Unify Pro HV (7pin)
  • Direct solder compatible with TBS Crossfire Nano & TBS Crossfire Nano Diversity Rx
  • 5X UART (UART1 = RX, UART2 = VTX)
  • Currentsensor & Camera Control included
  • 30.5x30.5 mounting holes
  • USB-Micro socket for firmware upgrades

All uarts have pad on board

ValueIdentifierRXTXNotes
1USART1PB7PA9PB7 FOR SBUS IN(inverter build in)
2USART2PA3PA2PAD USE FOR TRAMP/SmartAudio
3USART3PB11PB10USE FOR GPS
4USART4PA1PA0PA0 FOR RSSI/FPORT/TEL etc
5USART5PD2PC12PAD

I2C with GPS port together, also utilised for BARO or compass etc

ValueIdentifierfunctionpinNotes
1I2C1SDAPB9with GPS outlet
2I2C1SCLPB8with GPS outlet

Buzzer/LED output

ValueIdentifierfunctionpinNotes
1LED0LEDPC14
2BEEPERBEEPC13

6 Outputs, 1 PPM input

ValueIdentifierfunctionpinNotes
1TIM12_CH2PPMPB15PPM
2TIM3_CH3OUPUT1PB0DMA1_Stream7
3TIM8_CH1OUPUT2PC6DMA2_Stream2
4TIM1_CH3OUPUT3PA10DMA2_Stream6
5TIM1_CH1OUPUT4PA8DMA2_Stream1
6TIM8_CH3OUPUT5PC8DMA2_Stream4
7TIM3_CH4OUPUT6PB1DMA1_Stream2
10TIM4_CH1PWMPB6DMA1_Stream0 LED_STRIP
11TIM2_CH1PWMPA5FPV Camera Control(FCAM)

Gyro & ACC ,suppose ICM20602/MPU6000

ValueIdentifierfunctionpinNotes
1SPI1SCKPB3
2SPI1MISOPA6
3SPI1MOSIPA7
4SPI1CSPC4

OSD MAX7456

ValueIdentifierfunctionpinNotes
1SPI3SCKPC10
2SPI3MISOPC11
3SPI3MOSIPB5
4SPI3CSPA15

16Mbyte flash

ValueIdentifierfunctionpinNotes
1SPI2SCKPB13
2SPI2MISOPB14
3SPI2MOSIPC3
4SPI2CSPB12