📄️ Aikon F4
Description
📄️ AIORACERF3
AIORACERF3 Front
📄️ AIR32
Description
📄️ AirBotF4 and FLIP32F4
Flip32F4 and AirBotF4 are essentially the same. Both are based on the OP Revolution design, with some changes and addons.
📄️ AlienFlight (ALIENFLIGHTF1 and ALIENFLIGHTF3 target)
AlienWii is now AlienFlight. This target supports various variants of brushed and brusless flight controllers. The designs for them are released for public use at:
📄️ AlienFlight (ALIENFLIGHTF1, ALIENFLIGHTF3, ALIENFLIGHTF4 and ALIENFLIGHTNGF7 target)
AlienWii is now AlienFlight. This designs are released partially for public (CC BY-SA 4.0) and some for noncommercial use (CC BY-NC-SA 4.0) at:
📄️ AlienFlight (ALIENFLIGHTF1, ALIENFLIGHTF3, ALIENFLIGHTF4 and ALIENFLIGHTNGF7 target)
AlienWii is now AlienFlight. This designs are released partially for public (CC BY-SA 4.0) and some for noncommercial use (CC BY-NC-SA 4.0) at:
📄️ AlienFlight (ALIENFLIGHTF1, ALIENFLIGHTF3, ALIENFLIGHTF4 and ALIENFLIGHTNGF7 target)
AlienWii is now AlienFlight. This designs are released partially for public (CC BY-SA 4.0) and some for noncommercial use (CC BY-NC-SA 4.0) at:
📄️ AlienFlight (ALIENFLIGHTF1, ALIENFLIGHTF3, ALIENFLIGHTF4 and ALIENFLIGHTNGF7 target)
AlienWii is now AlienFlight. This designs are released partially for public (CC BY-SA 4.0) and some for noncommercial use (CC BY-NC-SA 4.0) at:
📄️ ALIENWHOOP
ALIENWHOOP Board
📄️ ANYFCF7
Description
📄️ ANYFCM7
Description
📄️ ApexF7
Features
📄️ ASGARD
Inverter Configuration on ASGARD (2017-06-10)
📄️ ASGARD32
Firmware targets
📄️ BeeRotor F4
BeeRotor F4 front
📄️ AIO Betaflight F3 Flight controller
Updates
📄️ BLUEJAYF4
Description
📄️ CC3D
Flashing Cleanflight/BetaFlight to CC3D with Mainport and FTDI Video:
📄️ Board - ChebuzzF3
The ChebuzzF3 is a daugter board which connects to the bottom of an STM32F3Discovery board and provides pin headers and ports for various FC connections.
📄️ Board - CJMCU
The CJMCU is a tiny (80mm) board running a STM32F103, which contains a 3-Axis Compass (HMC5883L)
📄️ CL_RACING AIO F4 Flight controller
Description
📄️ CLRACINGF7
MCU: STM32F722RE
📄️ Board - TBS Colibri RACE
The Colibri RACE is a STM32F3 based flight control designed specifically to work with the TBS POWERCUBE multi rotor stack.
📄️ CrazyBee F3 FR
CrazyBee F3 FR front
📄️ CrazyBee F3 FS
CrazyBee F3 FS front
📄️ CrazyBee F4 DX Pro
CrazyBee F4 DX Pro front
📄️ CrazyBee F4 FR Pro
CrazyBee F4 FR Pro front
📄️ CrazyBee F4 FS Pro
CrazyBee F4 FS Pro front
📄️ CRAZYFLIE2
Description
📄️ Board - DALRCF405
The DALRCF405 described here:
📄️ Board - DALRCF722DUAL
The DALRCF722DUAL described here:
📄️ Board - Elin F405
Hardware Features
📄️ Board - Elin F722
Hardware Features
📄️ Board - EXF405DUAL
Hardware
📄️ Board - EXF722AIO
Hardware
📄️ EXF722DUAL
Hardware
📄️ Board - F3FC Racing
Designed by RCExplorer.se
📄️ F4BY
Description
📄️ FF_PIKOBLX
Note for Serial RX configuration (v3.3.0 and later)
📄️ FuriusFPV RacePIT (v1.x) and RacePIT mini (V2.x)
Features
📄️ FISHDRONEF4
Description
📄️ Flip32 F3 OSD
Description
📄️ Flytower F4 v2
Description
📄️ Board - FLYWOOF405
This board use the STM32F405RGT6 microcontroller and have the following features:
📄️ Board - FLYWOOF411
This board use the STM32F411CEU6 microcontroller and have the following features:
📄️ Board - FLYWOOF7DUAL
This board use the STM32F722RET6 microcontroller and have the following features:
📄️ Board - FOXEERF405
The FOXEERF405 described here:
📄️ Board - FOXEERF722DUAL
The FOXEERF722DUAL described here:
📄️ FRSKYF3
FRSKYF3 Board
📄️ FRSKYF4
FRSKYF4 Board
📄️ **Overview**
The Fury F3 Flight controller has been designed from the ground up by quad pilots & builders
📄️ **Overview**
The FuryF4 is the next iteration in the Fury line of flight controllers. Designed around the STM32F4 MCU, it features a simple layout that makes connecting components convenient and easy to accomplish. The FuryF4 utilizes an SPI gyro (MPU-6000 or ICM-20689) for super fast communication with the MCU. Flight logging can be easily done by writing to the onboard data flash or SDCard slot.
📄️ Board - HAKRCF405
Hardware and Features
📄️ Board - HAKRCF722
Hardware and Features
📄️ Board - IFlightF4_TWIN_G
IFlightF4_TWIN_G : Real Twin Gyroscopes.
📄️ Board - JHEF7DUAL
Features
📄️ KAKUTE F3
Target Hex code: SPRACINGF3
📄️ KakuteF4-AIO
Description
📄️ KAKUTEF4V2
KAKUTE F4 FLIGHT CONTROLLER V2
📄️ KakuteF7
Features
📄️ KakuteH7
Description
📄️ KakuteH7V2
Description
📄️ KISSFC
Keep It Simple Stupid.
📄️ KIWI F4
Description
📄️ KIWI F4 V2
Flight Controller
📄️ KROOZX
Description
📄️ LUMBAF3
Affordable basic Flight Controller based on F3 and MPU-6000.
📄️ LUXF4OSD
This is an AIO Flight Controller F4 FC with OSD and 30A BLHeli_32 ESC.
📄️ Lux Mini F7
Features
📄️ LUX_RACE
Description
📄️ Board - Matek F405-CTR
Full details on the Matek Sys F405-CTR can be found on the Matek Website MATEKF405
📄️ NAME
MATEKSYS F405-STD
📄️ NAME
MATEKSYS F411-MINI
📄️ Board - MATEKSYS F722-SE
Full details on the MATEKSYS F722-SE can be found on the Matek Website MATEKF722SE
📄️ NAME
MATEKSYS F722-STD
📄️ NAME
MATEKSYS F722-OSD
📄️ Board - MERAKRCF405
MERAKRCF405 flight control is carefully optimized layout, so that users can be more concise,convenient wiring,.For ensure a good flight experience ,we use of high-performance MPU6000 gyroscope. After a long flight verification test, the flight control ensures stable flight performance. For details of flight control, please visit MERAK RC website//www.merakrc.com)
📄️ Board - MERAKRCF405
MERAKRCF405 flight control is carefully optimized layout, so that users can be more concise,convenient wiring,.For ensure a good flight experience ,we use of high-performance MPU6000 gyroscope. After a long flight verification test, the flight control ensures stable flight performance. For details of flight control, please visit MERAK RC website//www.merakrc.com)
📄️ MICROSCISKY
F1 brushed flight controller with a variety of integrated receivers.
📄️ MotoLab Tempest F4 Flight Controller
Description
📄️ MotoLab Typhoon F4 Flight Controller and VTX
MotoLab Typhoon F4 & VTX Video
📄️ MNR-MAGDALENA
BetaFlight
📄️ Board - MotoLab
The MOTOLAB build target supports the STM32F3-based boards provided by MotoLab.
📄️ MultiFlite PICO-B-FC
http://www.multiflite.co.uk
📄️ Board - AbuseMark Naze32
The Naze32 target supports all Naze hardware revisions. Revision 4 and 5 are used and
📄️ NERO
Description
📄️ Board - Nucleo H743 - RAM based image
This target for the Nucleo H743 is loaded entirely into the MCU RAM, thus facilitating quick turnaround development testing, without subjecting the flash storage to wear.
📄️ OMNIBUS-F4-Pro-Corners
OMNIBUS F4 Pro Corners
📄️ OMNIBUS
Omnibus is Latin for "for all".
📄️ OMNIBUSF4-V2
Hallo,
📄️ OMNIBUS F4 AIO, F4 V2/V3/V4, F4 Pro "(v2)"/V3 and ASGARD
Board identification
📄️ Board Omnibus F4 Nano V7
This is the new Nano FC from Airbot! With added features in comparison to the predecessor.
📄️ OMNIBUS F7
V2 support
📄️ OMNIBUS Fireworks v2
Flight Controller
📄️ OPENPILOT-REVOLUTION
Hardware overview
📄️ Board - Paris Air Hero 32 / Acro Naze 32 Mini
This board uses the same firmware as the Naze32 board.
📄️ PIKOBLX
This board target has been renamed to FF_PIKOBLX.
📄️ PLUMF4
PLUM F4
📄️ Podium
An incredible, beautifully designed racing flight controller.
📄️ Board - PYRODRONEF4
The PYRODRONEF4 target is new board developed by http://pirofliprc.com/
📄️ RCEXPLORERF3
Designed with 2 things in mind; Performance and cost
📄️ REVOLT
REVOLT V2 OWNERS TAKE NOTE
📄️ REVONANO
Description
📄️ RJXF7
Aikon F4
📄️ Board - RMRC Dodo
The RMRC Dodo board is made and sold by Ready Made RC. In terms of CPU pin mapping it is a clone of the SPRacingF3 board (also see the SPRacingF3 documentation). Currently there are three versions with slightly different hardware available: Rev. 1, 2, and 3.
📄️ RG SSD
Description
📄️ Board - RUSHCORE7
The RUSHCORE7 described here:
📄️ SINGULARITY
3.1.7 : this target should be back to normal with DSHOT support on motors 1-4.
📄️ SIRINFPV
OSD and VTX
📄️ SKYZONEF405
Description
📄️ Demon Soul F4
Description
📄️ Board - Sparky
The Sparky is a very low cost and very powerful board.
📄️ SPEDIX F4
Description
📄️ Board - SpeedyBee F4 AIO
Descriptions
📄️ Board - Speedy Bee F7 AIO
Description
📄️ Board - Seriously Pro SP Racing F3 (Acro/Deluxe)
The Seriously Pro Racing F3 board (SPRacingF3) is the first board designed specifically for Cleanflight.
📄️ Board - Seriously Pro SP Racing F3 EVO
The Seriously Pro Racing F3 Evo board (SPRacingF3EVO) is the evolution of the first board designed specifically for Cleanflight.
📄️ Board - Seriously Pro SP Racing F3 MINI
The Seriously Pro Racing F3 Mini (SPRacingF3Mini) is the second flight controller board designed specifically for Cleanflight. It is the only FC that supports all the latest Cleanflight features and the ONLY mini board with a full feature set that can also be mounted in mini frames as well as in standard 36x36mm mounting holes. With the new transponder feature it is the only truly race ready board available.
📄️ Board - Seriously Pro SP Racing F3 NEO
The Seriously Pro Racing F3 NEO board (SPRacingF3NEO) is a full-featured board designed specifically for quadcopters. The NEO FC/PDB features the latest gyro technology and stacks with an OSD/VTX board. The stack makes for an extremely compact and easy to install solution with the minimal of solder connections and external cables required. It's perfect for beginners and experienced pilots. The acc/gyro is an ICM20602, which is newer than you'll find in all other F3 boards and most F4 boards as of December 2016.
📄️ SPRACINGF7DUAL
The SPRacingF7DUAL is the first Betaflight/Cleanflight FC to support SIMULTANEOUS DUAL GYRO and PID AUDIO features.
📄️ Board - Seriously Pro SP Racing H7 EXTREME
The SPRacingH7EXTREME flight controller features a 400Mhz H7 CPU that runs twice as fast as the previous generation F7 boards.
📄️ Board - Seriously Pro SP Racing H7 NANO
The SPRacingH7NANO flight controller features a 400Mhz H7 CPU that runs twice as fast as the previous generation F7 boards.
📄️ Board - Seriously Pro SP Racing H7 ZERO
The SPRacingH7ZERO flight controller features a 400Mhz H7 CPU that runs twice as fast as the previous generation F7 boards.
📄️ Boards - STM32Discovery
STM32Discovery boards are relatively cheap boards featuring STM32 MCUs manufactured and distributed by STMicroelectronics. They are known as "tinkerer boards", not specifically as flight controllers, as they can be used for a variety of things. They are bigger and heavier than standard flight controllers, feature plug pins for ease of use and quick changes, no soldering required.
📄️ SYNERGYF4
Specifications
📄️ TinyBee F3
TinyBee F3 Front
📄️ TMOTOR F4
Description
📄️ TMOTOR F7
Description
📄️ Board - TRANSTEC F411 Series
Description
📄️ NAME
VGOODDHF4
📄️ Board - VIVAF4AIO
The VIVAF4AIO described here:
📄️ YuPiF4 by Copperyu
An high quality flight controller for the most demanding pilotes.
📄️ YuPiF7 by Copperyu
An high quality flight controller for the most demanding pilotes.
📄️ ZCOREF3
Description