RC Explorer F3 FC Racing
Designed with 2 things in mind; Performance and cost
Description
The RCExplorer F3FC Racing is a cheap STM32F3 FC with integrated voltage regulator, voltage monitoring, current sensor input, 3 UARTS, LED port, Servo feedback/RSSI and MPU6000 gyro
Target HEX name: RCEXPLORERF3
MCU, Sensors and Features
Hardware
- MCU: STM32F303CC
- IMU: MPU6000 (SPI)
- IMU Interrupt: Yes
- BARO: No
- VCP: Yes
- Hardware UARTS: 3
- OSD: No
- Blackbox: No
- PPM/UART Shared: No - PWM6 is used for PPM
- Battery Voltage Sensor: Yes, directly connected, no wiring necessary
- Integrated Voltage Regulator: Yes, 6S maximum
- Brushed Motor Mosfets: No
- Buttons: 1 - DFU
Features
- Current Sensor: Yes, input accepts 0-3.3V
- BlHeli passthrough: Yes
- WS2811 Led Strip: Yes, on dedicated LED output
- Transponder: No
Hardware Designs
Not public
Manufacturers and Distributors
RCExplorer.se Available here: http://rcexplorer.se/product/f3fc-racing/
Designers
David Windestål
Maintainers
Jaakko Laurikainen
Similar Targets
LUX_RACE SPARKY
Variants
None known
FAQ & Known Issues
No known issues yet.
The default resource mappings on all boards are for use on a quadcopter. If you want to use the board for a tricopter, you will have to manually remap the resources so you get a resource for the tail servo. This should work for the F3FC (Rcexplorer FC)
resource MOTOR 1 A08
resource MOTOR 2 B00
resource MOTOR 3 A04
resource MOTOR 4 NONE
resource MOTOR 5 NONE
resource SERVO 1 A07
Other Resources
Setup guide and such available here: http://rcexplorer.se/product/f3fc-racing/